The easi answer is yes!

As we know, new hair extensions should be washed prior to fitting, therefore, drying them is essential. The Easibond has been tested for heat and as long as the hair dryer is set to medium and there is enough space between the nozzle of the hairdryer and the Easibond, it is perfectly safe to blow dry the hair on the Easibond. 

All types of hair extensions fit onto the easibond, from nano's to wefts.

The Easibond comes with an adhesive pad and suction cups. The suction cups will attach to any flat shiny surface like a mirror or a plastic trolley. If your work station is a wooden one, we would recommend you use the adhesive pad as this is super strong. The adhesive pad is the more permanent option.

In a word, yes. It will hold all hair extension types, but was designed by a hair extension specialist to specifically hold all types of pre-bonded hair types. As we know fitting pre-bonded hair can be a stressful job and the Easibond takes away all of the stress for you.

Absolutely! The Easibond can save you upto an hour on a refit, 20 minutes on a tape and weft fitting and 40 minutes on a new fit of pre-bonded hair extensions. 

We recommend that you charge for the service and not for your time, remember your clients will be over the moon that they are not sat in your chair for as long. 

Remember you are saving up to an hour per refit, this allows you to fit in an extra client per day, an extra 5 clients per week and that's an extra 250 per year, that is some serious extra revenue for you and extra time that your clients will love you for!

Yes it comes with both.

Yes, the Easibond is made from recyclable plastic. 

It holds as much hair as you need so you can set up your workstation in seconds! 

What about organising other colours?  - When working with more than one colour of hair extensions, just line them up in colour order and you are ready to fit!

When left to your client to pass her hair to you, you find yourself getting stressed as your client never quite gets it right (why would she, she’s not a hairdresser!) Using the Easibond, your client can now sit and relax, read a book, chat to you or just take in what’s going on around her. After all that's what she's paying for.

The Easiweft enables you to wash, dry, style and store your hair with ease! It minimises knotting and tangling, prolongs the life of hair extensions and gives you the ideal place for storing your hair extensions when they are not being worn!

It is also used in the salon to hold all types of hair extensions when fitting (please see our salon section for more details)

So, this is where you have three options.

1. The Adhesive pad - this is used as a more permanent option when screw fixings can't be used. it will attach to any flat surface and is super strong.

2. The suction cups - these can be used to make the Easiweft a portable option. They will attach to any flat shiny surface.

So, this is a question we are asked a lot. The answer is, it depends on what you want to use a hair extension holder for. The Easiweft is an amazing tool that holds hair extensions for people at home and people in the salon.

Yes it is. Simply apply to a dry shower screen and you are ready to go!

Yes all attachments are included. 

Yes, the Easiweft is made from recyclable plastic. 

It can save up to an hour as you can remove the hair in length order and re apply it in the same way! This means you can fit more appointments in every day and increase your client base.

The Easiweft attaches to any flat surface using either suction cups as a portable option or an adhesive pad. It also comes with screw fixings for a more permanent fitting method. (All provided)

It is heat resistant and is made from the best quality materials.

The Easiweft specialises in holding wefts and tapes but can also hold tape-ins, weaves, pre-bonded, hot fusion, cold fusion and micro-link.

The adhesive strip is super sticky and attaches directly under the teeth of the Easibond and directly under the prongs of the Easiweft.

Yes, Yes, Yes!

Each pack has 10 disposable colouring sheets in.

The Easiloop loads both nano and micro rings in half the time making fitting that bit quicker and easier.

As long as the loop tool is not overloaded causing added stress to the end of the loop, the Easiloop should last a month with regular use. 

There are 2 Easigrips in each pack.

Yes, the hole sizes on our Pliers are perfect for the removal of all ring sizes, making it much easier to remove the hair extensions and to save time on refits.

Yes our pliers come in a fully custom and cushioned case, perfect for any hair extension kit.

They are made from stainless steel so they are lightweight and will not rust.

Pliers should not break, but this can happen when too much pressure is applied when closing the hair extension rings. Too much pressure will also close the rings too firmly causing damage to the natural hair. Try easing the pressure and your pliers will last so much longer.

Yes, once the blade in the razor has become blunt it can be easily removed and replaced. Ready to use again. We also supply replacement blades

Yes, our Razor comes in a fully custom and cushioned case, perfect for all hair extension kits.

The Hair Made Easi razor is made from stainless steel.

Yes, we sell replacement blades for the razor and there is a diagram showing how to replace the blade when needed.